Connections between columns and beams

Step 1

	We will now draw a standard haunch connection. - Open the drawing Haunch connection basics.dwg
	- Click on the icon Haunch connections
	- Select the column on intersection A2
	- Select the rafter of the column on A2
	- Double-click the connection Haunch WebReinforcement & Chamfer
	- Select the column on intersection A3
	- Select the rafter of the column on A3 - Then press <Enter> to end the command
	Zoom in on one of the new connections.
	- Activate the tab Bolts
	- Modify the top edge distance of the bolt pattern to 100
	- Press the button of the bolt pattern
	- Enter 80 as value for the first entry of the left table - Then press two times
	Advanced options for the bolt positions such as distance between are available in all macros using the button .

Step 2

	Connections with 3 or more base profiles are also possible. We will now draw a connection with 3 base profiles. - Open the drawing Apex with column support.dwg
	- Click on the icon Apex & Column
	- Select the column beneath the first apex
	- Select the left rafter
	- Select the other rafter
	- Double-click the connection 2 Column Endplates
	We will now apply this connection in other places. - Navigate to the apex in the back using met zoom/pan. - Select the column underneath the apex in the back
	- Select the left rafter
	- Select the other rafter - Then press <Enter> to end the command
	- Activate the tab Bolts
	- Modify the number of bolts to 2
	- Press in the Review macro window