Creating General Arrangement drawings

Step 1

	We will now create and modify a general arrangement plan with multiple views. - Open the drawing GA Drawings.dwg
	- Click on the button and then click on Add new Plan views
	- Activate Grid A - Then click on
	- Make sure that only the option Annotate profiles is checked - Then click on Wait a few seconds until the new view becomes visible.
	- Click on the icon Detail in GA drawing
	- Make a frame around the connection at the top right corner
	- Press the button twice to accept the default values
	- Select a point somewhere in empty space next to the existing view for the location of the new detail
	You can add as many views as you want on one page.

Step 2

	We will now add a dimension to the view, modify the 3D model, and then refresh the 2D drawing. - Click on the icon Chain dimension
	- Zoom to the middle connection and move the cursor to the top line of the tube. Click the left mouse button to choose the endpoint of that line.
	- Move the cursor to the top line of the tube underneath. Click the left mouse button to choose the endpoint of that line.
	- Move the cursor to between the two tubes and click on the left mouse button. - Then press <Enter> to end the chain dimension tool.
	- Click on the tab just below the drawing, so that model space becomes active
	- Start the Move commando using the top menu Modify
	- Select the two tubes between columns A1, A2 and A3 - Then press <Enter> to confirm the selection
	- Click somewhere in empty space - And then enter the following coordinates : @0,0,500 followed by <Enter>
	- In the Sheets manager window, click with the left mouse button on the sheet Grid A in order to select it - Then click the right mouse button to open a sub menu - Click on Refresh views in the menu
	The view was updated to reflect the modified 3D parts. The dimension and the annotations of the modified tubes were also updated.